English
GREAT BRITAIN • CUSTOMER SERVICE
www.clasohlson.co.uk
1
2
Outer: 100% Polyester
Inner: 100% Polyester
p
Ver
. 20210831
Rechargeable Night
Light
Art.no 36-8217
Please read the entire instruction manual before using
the product and then save it for future reference.
We reserve the right for any errors in text or images and
any necessary changes made to technical data.
In the event of technical problems or other queries,
please contact our Customer Services.
Safety
Warning:
Not suitable for children under
3 years. Long cable. Strangulation hazard.
Instructions for use
1. Press [ ] to turn the light on. The light will shine
with a constant white light.
2. Tap the light gently against the surface it is standing
on to change the light mode. The light mode togg-
les between:
-
constant white light
-
chasing RGB colours
-
constant colour
-
chasing RGB colours
-
off
3. Press [ ] to turn the light off completely.
Care and maintenance
•
Turn off the light and unplug the USB charger from
the wall socket before cleaning.
•
Wipe the light clean using a dry cloth.
Responsible disposal
This symbol indicates that this product
should not be disposed of with general
household waste. This applies throughout
the entire EU. In order to prevent any
harm to the environment or health hazards
caused by incorrect waste disposal, the
product must be handed in for recycling so that the ma-
terial can be disposed of in a responsible manner. When
recycling your product, take it to your local collection
facility or contact the place of purchase. They will ensure
that the product is disposed of in an environmentally
sound manner.
Specifications
USB charger
Input 220–240 V AC, 50 Hz.
Output 5 V, 1 VA
Battery
1 × 503450 Lithium battery,
3.7 V/1000 mA
Micro-USB cable
1 m
Charging time
Approx. 2.5 hours
Operating time
Approx. 10 hours
Dimensions
Diam: 11 cm, height: 16 cm
This product is intended for
indoor use only.
This product is only to be connected
to equipment bearing either of the
following symbols.
Product description
1. [ ] On/off
2. Micro-USB port for the included charging cable.
Charging
1. Connect the Micro-USB connector on the included
charging cable to the back of the light and the USB
connector to the included USB charger.
2. Connect the charger to a wall socket.
3. When the light is charging, a red light will come on
inside the Micro-USB socket. When the battery in
the light is fully charged, the red light will go out.
