GREAT BRITAIN
For consumer contact, please visit www.clasohlson.co.uk
and click on customer service.
ENGLISH
Ver
. 2008
10
Anti-Lost Alarm
Article number: 36-3557
Important
•
When the alarm is initially separated it is important
that the two parts are at least 30 cm apart.
•
The alarm’s effective working distance can be
affected by; walls, metal objects, moisture and
radio signals in the vicinity. Do not expose the
product to moisture or impact.
•
To preserve the battery, remember to turn off the
product when not in use.
Changing the batteries (both parts)
1. Carefully pull the battery holder outwards until it
stops (approx. 5 mm).
2. Press in the two locking tabs on the side of the
battery holder to completely remove the holder.
3. Remove the battery and replace it with a new
CR2032 coin cell battery. The battery’s minus pole
(-) should point downwards in the battery holder.
4. Replace the battery holder.
Troubleshooting Guide
It is time to change the battery when:
•
The LED becomes dim.
•
The alarm begins to sound at an abnormally
short distance.
•
The signal begins to sound weak.
The alarm does not sound despite the parts
being separated:
•
Make sure that the distance between the parts
does not exceed approx. 5-8 m.
•
The alarm’s effective working distance can be
affected by; walls, metal objects, moisture and
radio signals in the vicinity.
Disposal
Follow local ordinances when disposing of this
product. If you are unsure of how to dispose of this
product, please contact your municipality.
Specifications
Batteries:
2 x CR2032
Current consumption:
Receiver: 3 ~ 8 mA
Transmitter: 5 ~ 7 mA
Transmission frequency: 434.92 MHz
Size:
75x34x14 mm (LxBxH)
Please read the entire instruction manual before using
the product and save it for future reference. We reserve
the right for any errors in text or images and any neces-
sary changes made to technical data. If you have any
questions regarding technical problems please contact
our Customer Services (see address on reverse).
Product Description
A mini alarm in two parts which activates when the
distance between the sender and receiver exceeds
5 to 8 m. Perfect to place in your handbag, wallet
or even onto your child’s clothes. Operates on 2 x
CR2032 batteries (included).
Functions
•
Turn on the alarm by separating the two parts.
•
Turn off the alarm by putting the parts together
again.
Operation
1. Separate the two parts of the alarm and hold them
approx. 30 cm apart. The receiver emits a long
and short signal at the same time as the LEDs on
the transmitter and receiver flash. The transmitter
synchronises with the receiver.
2. The alarm is now ready for use.
• If the receiver emits a constant signal and the
LED is also constantly on synchronisation has
been unsuccessful. Connect the two parts and
begin from step 1.
3. Place or fasten the transmitter (marked
“
Reminder”)
to your handbag, wallet or on your child’s clothes.
The receiver is carried on your person.
4. When the distance between the two parts of
the alarm exceed approx. 5-8 metres the alarm
will activate.
5. The alarm emits three signals of equal length.
When the two parts of the alarm are brought
closer together the alarm will cease.
OFF
ON
