4
English
Installation/Inflating
Preparations
• Make sure that the surface where you lay the product is level and free from stones, shards of
glass and other sharp objects.
• Only use a foot or hand pump to inflate the product.
Note
: Do not use compressed air;
the product cannot withstand high pressures.
To inflate the board
1. Unpack all the parts in the bag (8).
2. Place the folded board on a flat surface and
roll it out.
3. Unscrew the valve cap (2).
1
2
4. Push the nozzle of the air pump (7) into
the air valve and rotate clockwise until you
hear a click.
5. Pump up the board to the correct air
pressure, approximately 1 bar (max 1.04
bar). Read the meter above the pump’s
handles.
6. Twist the nozzle of the air pump anti-
clockwise until it has been released from
the air valve and can be pulled out.
7. Screw the valve cap back on.
