English
GREAT BRITAIN •
customer service
tel:
08545 300 9799
e-mail:
internet:
www.clasohlson.com/uk
V
er
. 20
130730
3 mm
Tape
}
Oil lamp
Art.no 31-4656
Please read the entire instruction manual before using the
product and save it for future reference. We reserve the right
for any errors in text or images and any necessary changes
made to technical data. If you have any questions regarding
technical problems please contact Customer Services.
Safety
WARNING:
Even the tiniest amount of lamp oil from
the lamp or wick ingested by a small child can lead to
severe lung damage.
WARNING:
If any lamp oil has been swallowed, do not induce
vomiting. Seek immediate medical advice or contact a poison
information centre, read the warning on the lamp oil label.
WARNING:
Explosion hazard – never use a fuel other than
pure lamp oil/paraffin. NEVER use petrol, meths or other
highly flammable substances.
Never fill the lamp if the oil container is warm or if the wick
is still glowing.
For outdoor use only.
WARNING:
Keep the lamp out of children’s reach both
when in use and when stored.
Never leave a lit oil lamp unattended.
The oil lamp must not be modified in any way. Use only
genuine wick.
Product description
•
Oil lamp for outdoor use with replaceable wick and
metal oil container.
•
Only for lamp oil or paraffin.
Use
1. Remove the oil container.
2. Unscrew the wick holder (3) anticlockwise and remove
the wick. Make sure that the wick (2) looks good.
Adjust the length of the wick if needed.
3. Fill the oil container (4) with lamp oil/paraffin. The oil
container holds up to 100 ml oil.
4. Push the wick into the oil container and screw the wick
holder in clockwise.
5. Position the base of the lamp in a suitable place and let
the wick absorb some fuel before lighting it.
6. Extinguish the flame by placing the lid (1) over the wick
holder guard.
7. The oil lamp will burn for approximately 4 hours. If the wick
is extinguished before the fuel has run out, the wick will
last longer.
1. Lid
2. Wick holder with safety guard
3. Wick
4. Oil container
Replacing/adjusting the wick
1. Remove the remains of the old wick.
2. Wrap some tape around the end of the new wick
(if it doesn’t already have any).
3. Thread the taped end of the wick through the wick holder
from underneath.
4. Pull the wick through the wick holder so the tape can
be removed.
5. Adjust the wick so that it protrudes about 3 mm above
the top edge of the wick holder.
Wicks can be purchased as accessories, art. no: 31.4656-1.
Disposal
Follow local ordinances when disposing of this product. If you
are unsure of how to dispose of this product, please contact
your local authority.
Compliant with European standard: BS EN 14059:2002
1
2
3
4
