Clas Ohlson 18-3583 Manual Download Page 1

English

UNITED KINGDOM •

 

customer service

 

tel:

 020 8247 9300 

e-mail

 [email protected] 

internet

 www.clasohlson.co.uk 

postal

 10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZ

Ver

. 20181206

3.6 V Cordless Screwdriver

Art.no  18-3583, -1 

Model  PLSL-167A-UK

 

40-9710, -1 

 

PLSL-167A

Please read the entire instruction manual before using the product and then 
save it for future reference. We reserve the right for any errors in text or 
images and any necessary changes made to technical data.
In the event of technical problems or other queries, please contact our 
Customer Services.

Safety

General safety instructions for cordless power tools

Warning:

 Read all the instructions. Failure to comply with the following 

instructions can lead to electric shock, fires and/or serious injury. The term 
“power tool” in the warning text below refers to your handheld mains 
operated or battery operated tool.

1) The work area

a) 

Keep the work area clean and well lit.

 Cluttered or dark areas invite 

accidents.

b) 

Do not operate power tools in explosive atmospheres, such as 
in the presence of flammable liquids, gases or dust.

 Power tools 

create sparks which may ignite dust or fumes.

c) 

Keep children and bystanders away while operating a power tool. 

Distractions can cause you to lose control.

2)  Electrical safety

a) 

Power tool plugs must match the outlet. Never modify the plug 
in any way. Never use an adaptor plug together with earthed 
power tools.

 Unmodified plugs and matching outlets will reduce 

the risk of electric shocks.

b) 

Avoid body contact with earthed or grounded objects, such as 
pipes, radiators, ovens or refrigerators. 

There is an increased risk of 

electric shock if your body is earthed.

c) 

Do not expose the power tool to rain or other wet conditions. 

Water entering a power tool will increase the risk of electric shock.

d) 

Do not abuse the mains lead. Never use the lead for carrying, 
pulling or unplugging the power tool. Keep the lead away from 
heat, oil, sharp edges and moving parts. 

Damaged or tangled leads 

increase the risk of electric shock.

e) 

When operating power tools outdoors, use an extension lead that 
is suitable for outdoor use.

 The use of an extension lead designed for 

outdoor use decreases the risk of electric shocks.

f) 

If operating a power tool in a damp location, use a residual current 
device (RCD) protected supply.

 Use of an RCD reduces the risk of 

electric shock.

3)  Personal safety

a) 

Stay alert, watch what you are doing and use common sense when 
operating a power tool. Do not use power tools if you are tired or 
under the influence of drugs, alcohol or medication.

 One moment of 

inattention while using a power tool may result in serious injury.

b) 

Use personal protective equipment. Always wear eye protection. 

Using protective clothing such as dust masks, non-slip safety shoes, 
helmets and ear defenders when needed decreases the risk of injury.

c) 

Avoid unintentional starting. Make sure that the power switch is 
set to OFF before connecting to power source and/or battery pack. 

Carrying power tools with your finger on the switch/trigger or energising 
power tools that have the switch set to ON, invites accidents.

d) 

Remove all service tools/keys before switching the power tool on. 

A service tool left on a rotating part of the power tool may result in 
personal injury.

e) 

Do not overreach. Keep proper footing and balance at all times. 

This will allow you to have more control in unexpected situations.

f) 

Dress properly. Do not wear loose-fitting clothing or jewellery. 
Keep hair, clothes and gloves away from moving parts. 

Loose clothes, jewellery or long hair can be caught in moving parts.

g) 

If equipment for dust extraction and collection is available, make 
sure that it is connected and used properly. 

Use of dust collection 

equipment can reduce dust related hazards.

4)  Power tool use and care

a) 

Do not force the power tool. Use the correct power tool for your 
application. 

The correct power tool will do the job better and safer if 

used at the rate for which it was designed.

b) 

Never use the power tool if the power switch does not switch 
the tool on and off properly.

 Any power tool that cannot be controlled 

by the power switch is dangerous and must be repaired.

c) 

Unplug the lead from the wall socket, before making any 
adjustments, changing accessories or storing the power tool. 

These precautions reduce the risk of the power tool starting 
unexpectedly.

d) 

Store idle power tools out of the reach of children and do not allow 
people who are unfamiliar with the power tool or these instructions 
to operate the tool. 

Power tools are dangerous in the hands of 

untrained users.

e) 

Maintaining power tools. Check for any incorrect settings, parts 
that catch, broken parts or anything else which may cause 
the power tool to malfunction. If any damage is noticed, have 
the power tool repaired before using.

 Many accidents are caused by 

poorly maintained power tools.

f) 

Keep tools sharp and clean.

 Properly maintained cutting tools with 

sharp blades are less likely to bind and are easier to control.

g) 

Use the power tool, accessories and similar in accordance with 
these instructions and in an appropriate way suitable for the type 
of power tool used, taking into account the working conditions and 
the work to be performed. 

Use of the power tool for a purpose other 

than that for which it is intended could result in a dangerous situation.

5)  Use and maintenance of cordless power tools

a) 

Make sure that the power switch is set to OFF before attaching 
the battery.

 Attaching a battery to a power tool when the power switch 

set to ON is inviting an accident.

b) 

Only charge the battery using a charger approved by 
the manufacturer. 

A charger suitable for one type of battery can pose 

a fire hazard if used for another type of battery.

c) 

Use power tools only with specifically designated battery packs. 

The use of other types of batteries might cause damage or fire.

d) 

When not in use, the battery should be stored away from other 
metal objects such as paper clips, coins, keys, nails, screws or 
any small objects that could bridge the gap between the battery 
terminals. 

Shorting the battery terminals together may cause burns or 

a fire.

e) 

Mistreating the battery may cause it to leak acid. Contact with 
this acid should be avoided. If contact accidentally occurs, flush 
with water. 

If the acid contacts eyes, additionally seek medical help. 

Battery acid can cause irritation and burns.

6) Service

a) 

Have your power tool serviced by a qualified repair person using 
only identical replacement parts.

Additional safety instructions for chargers and batteries

•  Only use the supplied charger to charge the screwdriver with.
•  Never use the charger for charging anything other than the screwdriver 

it was supplied with.

•  Do not expose the screwdriver to direct sunlight, flames or other heat 

source which might cause the screwdriver to explode.

•  Do not expose the screwdriver or charger to water.
•  Do not dismantle the screwdriver as this may lead to short-circuiting 

and the risk of explosion.

Responsible disposal

This symbol indicates that this product should not be disposed of 
with general household waste. This applies throughout the entire 
EU. In order to prevent any harm to the environment or health 
hazards caused by incorrect waste disposal, the product must be 
handed in for recycling so that the material can be disposed of in 
a responsible manner. When recycling your product, take it to your 
local collection facility or contact the place of purchase. They will 
ensure that the product is disposed of in an environmentally sound manner.

In accordance with Directive 2012/19 /EU and 2006/66/EC, 
all electrical waste, electronic equipment and batteries must 
be collected and disposed of properly to reduce negative 
environmental effects.

Built-in batteries must only be removed by service technicians that 
have the requisite knowledge. An electric power tool can be irreparably 
damaged if it is opened the wrong way.

To remove the battery:
•  Activate the tool until the battery is completely discharged.
•  Open the tool so that the battery becomes accessible.
•  The battery terminals must be disconnected separately, one after the other. 

The battery terminals must be isolated. This is to stop the residual current 
in the battery from being released through a short circuit.

Summary of Contents for 18-3583











Reviews: