Ver
. 20140409
6-Way Extension Lead
with Wireless Switch
Art.no 18-2146 Model EMW306RF-UK + EMW500T
36-3391
EM EMD500ET
Please read the entire instruction manual before use and save it for
future reference. We reserve the right for any errors in text or images
and for making any necessary technical changes to this document. If
you should have any questions concerning technical problems please
contact our Customer Services.
Safety
• Never overload the lead. Max. 13 A, 3000 W (resistive load).
• The extension lead is intended for indoor use only (IP 20).
• Clean using a dry cloth. Avoid contact with water and
other liquids.
• Never use the extension lead in environments where flammable or
explosive gases are stored.
• Never try to mend, open or modify the product in any way.
Contact the retailer if there is a problem with the product.
Product Description
6 Way Extension Lead with Wireless Switch
• Energy saving extension lead. Turns off all connected devices with
the click of a button on the portable wireless switch.
• Batteries are included for the switch.
• 1.4 metre cable.
• Off-set outlets, two of which are extra wide for adaptors or transformers.
• Fixture for wall mounting.
• Earthed with safety shutters. 230 V/13 A.
Functions
1. The wireless extension lead EMW306RF-UK turns on/off connected
electrical devices with the help of the a wireless transmitter
(EMW500T).
2. Two-pole switch with two relays cuts off both neutral and phase for
extra safety.
3. Appropriate for controlling on/off functions for many applications for
both safety and energy savings.
Operating Instructions
Before Using
Before using the extension lead you must first connect it to
the wireless switch.
1. Connect the extension lead’s plug to a wall socket.
2. Press and hold the
ON/OFF Learning Code
button on
the extension lead until the LED begins to flash.
3. Then press the wireless switch’s
ON
button once. When the LED
stops flashing both devices are connected to each other.
Daily Usage/On and Off Function
1. Connect the extension lead’s plug to a wall socket.
2. Connect the desired devices to the extension lead.
3. Use the buttons on the wireless switch to turn the extension lead
on or off:
-
ON
– Turns on the extension lead. The extension lead’s LED is on.
-
OFF
– Turns off the extension lead. The extension lead’s LED
is off.
You can even turn the extension lead on/off directly by pressing
the
ON/OFF Learning Code
button on the extension lead.
Care and Maintenance
Changing Batteries (Wireless Switch)
Change the batteries when the range decreases or when the switch’s
LED doesn’t flash when a button is pushed.
Changing the battery
1. Hold the switch with the LED pointed upwards according to
the figure and simultaneously rotate the top part clockwise until
a “click” is heard.
2. Remove the top cover and replace the battery with a new LR23A
battery.
3. Replace the cover according to the figure and carefully turn
the cover clockwise until a “click” is heard.
4. Press a button on the switch and make sure the LED flashes.
Cleaning
Clean using a dry cloth. Avoid contact with water and other liquids.
Disposal
Follow local ordinances when disposing of this product. If you are unsure
about how to dispose of this product contact your municipality.
Specifications
Extension Lead – EMW306RF-UK
Max load
13 A, 3000 W (resistive load)
Rated Voltage
230 V AC, 50 Hz
Cable
H07RN-F 3G1,5 mm²
Wireless transmitter – EMW500T
Battery
1 × LR23A (12 V DC)
Frequency
433.92 MHz
Range
Up to 10 metres
English
GREAT BRITAIN •
customer service
tel:
0845 300 9799
e-mail:
internet:
www.clasohlson.com/uk
