2
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INTRODUCTION
Thank you for purchasing this CLARKE Air Hammer. Before attempting to use
this product, please read this manual thoroughly and follow the instructions
carefully. In doing so you will ensure the safety of yourself and that of others
around you, and you can look forward to your purchase giving you long and
satisfactory service.
Keep these instructions in a safe place for future reference.
SPECIFICATIONS
Please note that the details and specifications contained herein are correct
at the time of going to print. However CLARKE International reserve the right to
change specifications at any time without prior notice.
Maximum Operating Pressure
90 psi (6.2 bar)
Air Consumption (under load)
5.5 cfm
Max Blows per minute
3000
Variable speed
Trigger operated
Air Inlet Size
1/4” BSP female thread
Vibration Levels
9.8 m/s
2
(uncertainty factor K= 1.5m/s
2
)
Sound pressure level
97 dB LpA
Sound power level
108 dB LWA
(uncertainty factor K
3 dB
Dimensions (L x W x H)
160 x153 x 42 mm
Weight 1.35
kg
Chisel size
Overall length = 175 mm
Body width = 11.6 mm
Shank length = 42 mm
Shank width = 10.2 mm
Summary of Contents for X-Pro CAT200
Page 16: ......