11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
APPLYING CHEMICALS AND CLEANING AGENTS
To improve the cleaning performance, You can introduce chemical cleaning
agents (detergents) to the water jet using the detergent bottle and nozzle. This
is particularly useful when washing cars, greasy engine parts, removing oil
spots on concrete etc.
To prepare for detergent application,
1. Ensure the trigger lock is in the
locked position. and the machine
is switched OFF.
• It is not necessary to pull the
trigger to release the pressure.
2. Connect the Detergent Bottle
and Nozzle.
3. Unscrew the bottle from the
nozzle and fill with the required
detergent.
• Only use detergents
recommended for use with
pressure washers, such as
CLARKE Traffic Film Remover
which is a powerful low foaming agent for car cleaning, patio
cleaning etc., or CLARKE Wash & Wax, both available from your
CLARKE dealer.
4. When the container is filled with detergent, screw it back on to the nozzle
ensuring the plastic pick-up tube is in the fluid.
5. Switch ON the pressure washer, release the trigger lock and spray the
detergent onto the vehicle, patio etc.
• Allow the detergent a little time to work itself into the grime.
6. To rinse and clean, replace the Detergent Bottle and Nozzle with the
Pressure Washer Lance.
7. After using the detergent bottle and nozzle, rinse the complete assembly
(bottle and nozzle) thoroughly with clean water. (See Maintenance)
.
CAUTION: IF YOUR EYES COME INTO CONTACT WITH ANY CLEANING
FLUIDS, RINSE THEM IMMEDIATELY WITH PLENTY OF FRESH CLEAN WATER.
AND SEEK MEDICAL ADVICE IF REQUIRED.
Summary of Contents for JETSTAR 1750
Page 20: ......
