SUBMERSIBLE
WATER PUMP
Model Nos.
HSE120 - 120A - 240 - 240A - 250A
& HSEC 400A
OPERATING & MAINTENANCE
INSTRUCTIONS
0598
Page 1: ...SUBMERSIBLE WATER PUMP Model Nos HSE120 120A 240 240A 250A HSEC 400A OPERATING MAINTENANCE INSTRUCTIONS 0598...
Page 2: ...not lift the pump by the mains cable or where fitted the float switch cables 7 DO NOT run the pump with the body exposed for longer than 10 minutes 8 DO NOT install the pump on sand or ground which i...
Page 3: ...3 3 ELECTRICAL CONNECTIONS All models EXCEPT HSE 250A should have their mains lead connected to a standard 230Volt 50Hz electrical supply through an approved plug or a suitably fused isolator switch W...
Page 4: ...ILL NOT START 1 Manual type i e without float switch 1 1 Check to ensure Power is switched on 1 2 Check fuse consult an electrician if in doubt 1 3 If extension lead is fitted check connections consul...
