Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
MODEL NO: CPPRSS
PART NO:
PART NO: 6499630
CHEMICAL PLUNGER PUMP
INTRODUCTION
Thank you for purchasing this CLARKE chemical plunger pump,
Suitable for water, alcohol, petroleum, diesel, paraffin, lubricant, water-based chemicals, acid and alkaline solutions.
Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully.
LIST OF CONTENTS
ASSEMBLY
• 1 x Pump
• 1 x Outlet tube
• 1 x Handle assembly
• 1 x Extension Inlet tube
• 2 x Nuts and Bolts
• 1 x 2 piece telescopic extension with filter
FITTING THE OUTLET TUBE
1. Remove the nut from the pump as shown.
2. Place the nut over the outlet tube and back
onto the pump
FITTING THE
HANDLE ASSEMBLY
FITTING THE TELESCOPIC EXTENSION TUBE
1. Connect the handle as shown and secure at
each point using the small nuts and bolts.
1. Fit the telescopic extension with filter together
as shown
