Clarke CONTRACTOR 6462072 Operation & Maintenance Instructions Manual Download Page 15 | Manualshive

Page: 15 / 20

background image

15

MAINTENANCE

There are no user serviceable parts in this router, all servicing should be carried
out by your nearest Clarke dealer.

CLEANING

• To ensure the best performance from the router, it must be kept

clean.

• To reduce fire hazard, keep the cooling vents free of debris.

GENERAL MAINTENANCE

• Make sure that all nuts, bolts and screws are tight and secure.

• Always have any damaged or worn parts repaired, or replaced.

• Always have your router inspected and maintained by qualified

service personnel. Do not attempt to repair the router unless you are
qualified to do so.

STORAGE

• Make sure that the router has been thoroughly cleaned before

storing it in a clean, dry place out of the reach of children.

ENVIRONMENTAL PROTECTION

Do not dispose of this product with general household waste. All
tools, accessories and packaging should be sorted, taken to a
recycling centre and disposed of according to the laws governing
Waste Electrical and Electronic Equipment.

«
...
13
14
15
16
17
...
»

Summary of Contents for CONTRACTOR 6462072





















Reviews:

No comments

Related manuals for CONTRACTOR 6462072

Brand: UNICOM Pages: 1

Brand: ?omtime Pages: 62

Brand: Lucent Technologies Pages: 20

WGR614 - Wireless-G Router Wireless

Brand: NETGEAR Pages: 116

IE-SW-VL09T-6TX-3SC

Brand: Weidmuller Pages: 14

3CRWDR101A-75-US - OfficeConnect ADSL Wireless 54 Mbps 11g Firewall...

Brand: 3Com Pages: 146

Brand: NetComm Pages: 4

Brand: TP-Link Pages: 2

Brand: Qlogic Pages: 12

Brand: Andersson Pages: 47

Brand: TCL Pages: 38

Brand: TCL Pages: 23

Brand: Billion Pages: 12

Brand: LOOQS Pages: 13

Brand: Loopcomm Pages: 66

Brand: Loopcomm Pages: 83

BiPAC 8200AXL-1200

Brand: Billion Pages: 94

Brand: D-Link Pages: 80

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands