11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BEFORE USE
SELECTING THE CORRECT GUARD
Both open and a closed guard are
supplied with the CON1150.
The “open” guard is for grinding and
the “closed” one is for cutting.
The open guard should be used with
type 27, 28 and 29 discs as follows;
• Type 27 - Depressed centre
grinding discs
• Type 28 - Depressed centre
grinding discs cone shaped
• Type 29 - Depressed centre semi-flexible discs
The closed guard should be used with type 1, 41 & 42 discs as follows;
• Type 1 - Straight grinding discs
• Type 41 - Flat cutting off discs
• Type 42 - Depressed centre cutting off discs.
SELECTING SUITABLE ABRASIVE AND CUTTING DISCS
The following Clarke discs are suitable for use with the CON1150. Always use
the correct disc and guard type for its intended task.
Use
Model No
Diameter
Bore
Part No
Cutting & Grinding
PD1 (plasma) 115 mm
22 mm
3052050
Metal Cutting
-----------------
115 mm
22 mm
6470775
Metal Grinding
-----------------
115 mm
22 mm
6470705
Masonry Cutting
-----------------
115 mm
22 mm
6470735
Summary of Contents for CON1150
Page 21: ......
