12
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CARE AND MAINTENANCE
CLEAN THE EXTERIOR PART OF THE HOT WASHER WITH A DRY CLOTH
• Always keep the hot washer clean so that cooling air can pass through
the air vents without obstruction.
CLEANING THE WATER FILTER
To ensure the pump gives good
service it is extremely important to
check and clean the water filter
frequently.
1. Remove filter from the water inlet
of the pump as shown.
2. Clean the inside and outside of
the filter by flushing it with water.
3. Refit the filter into the water inlet.
• Do not operate the hot washer without the filter in place.
CLEANING THE NOZZLE
A blockage in the nozzle may
prevent the hot washer from
operating correctly so it must be kept
clear.
1. Switch off the hot washer.
2. Pull trigger on the gun handle to
release any water pressure.
3. Remove the lance.
4. Clean the nozzle with the pin provided.
5. Rinse the lance in running water.
WARNING: THE HOT WASHER MUST BE DISCONNECTED FROM ITS POWER
SOURCE, BY REMOVING THE PLUG FROM THE SOCKET OUTLET, DURING
CLEANING OR MAINTENANCE.
WARNING: DO NOT SPRAY THE HOT WASHER WITH WATER OR
DETERGENTS/AGGRESSIVE SOLVENTS. THE HOT WASHER COULD BE
DAMAGED.
Summary of Contents for 7320178
Page 20: ......
