Clark OSQ 126, Operator'S Manual

Page: 67 / 100

5.5
Daily Inspection
Check Lift and Lower Controls
PRESS TO LIFT
PRESS TO LOWER
Check Braking
The brake should be applied by either reverse braking (plugging) or by
releasing the travel control switch and allowing the vehicle to coast brake.
The drive motor should stop when coast braking is used.
Check the foot (dead man's) switch to ensure the emergency / parking
brake engages when the foot switch is released. This method of braking is
for emergency braking situations only.
Fully raise and then lower the operator platform. The control buttons should
return to the OFF position when released. The hydraulic pump motor should
stop when the maximum lift height is reached. Check for any binding in the
upright. Report any issues to your supervisor or service technician.