Clark OSQ 126, Operator'S Manual

Page: 56 / 100

4.4
Operating Your Vehicle
CAUTION
Only use the emergency stop switch or foot switch to brake
the vehicle during dangerous situations. Overuse can cause
damage to the machine.
The vehicle can brake in three different ways:
• Reverse Braking : while the vehicle is traveling, press the travel
switch (D) in the opposite direction of travel. The vehicle will de-
celerate through the traction controller until it starts to move in the
opposite direction. Use caution when reverse braking, especially
at higher speeds. This is also referred to as "plugging".
• Coast Braking : while traveling, release the travel switch (D) and
allow the vehicle to coast to a stop.
• Emergency Braking : Press the emergency stop switch (C). The
vehicle will come to an immediate stop. Also, releasing the foot
switch (A) will apply the emergency brake.
The brake method depends on the operating and driving conditions. The
operator must always be looking in the direction of travel. If there is no
hazard, brake moderately by using the reverse (plugging) or coast method.
Braking
CAUTION
Use care NOT to accidentally activate the Emergency
Stop Switch when operating the vehicle.