Clark OSQ 126, Operator'S Manual

Page: 38 / 100

3.2
Know Your Vehicle
General Vehicle
The CLARK OSQ is designed to pick and transport goods indoors, on smooth
and level surfaces only. Loads can be stacked, unstacked and transported
over long distances.
Chassis / Upright
• Heavy duty I-beam design, 3-stage upright
• Maximum lift heights: 126" (320 cm), 162" (411 cm), and 192"
(487 cm).
• Total vehicle weight: 2268 lb (1028 kg) to 3160 lb (1434 kg).
• Travel speed is variable (dependent upon platform height) up to 5.5
km/h (3.4 mph), optional high speed option of 8.0 km/h (5.0 mph).
• 1000 lb (453 kg) total lifting capacity.
• 500 lb (226 kg) front pick tray capacity.
• 300 lb (136 kg) operator weight capacity.
• 200 lb (90 kg) hideaway rear tray capacity.
Controls
• Electronic power steering.
•
Infinitely variable travel speed control, allows for brake "plugging".
• Fingertip lift and tilt controls.
• Two driving modes (HIGH and LOW) and four speed modes (Level
1-4).
• Horn button and emergency stop switch intuitively located.
• 180° steering for maneuverability.
Drive Unit
• Heavy duty drive unit with double reduction helical spur and spiral
bevel gears.
• Totally enclosed drive unit with lubricating oil bath.
• Vertical mount drive motor for easy service accessibility.
System Descriptions