Clark OSQ 126, Operator'S Manual

Page: 13 / 100

xi
Safety Standards
IMPORTANT!
You should be familiar with the additional operating and mainte-
nance safety instructions contained in the following publications:
ANSI / SAIA A92.6: American National Standard for Self-Propelled Elevat -
ing Work Platforms (MEWPs). Available from: ANSI Headquarters, 1899 L
Street NW 11th Floor, Washington, DC 20036.
NFPA 505: Fire Safety Standard for Powered Industrial Vehicles: Type
Designations, Areas of Use, Maintenance and Operation. Available from:
National Fire Protection Association, Inc., 1 Batterymarch Park, Quincy,
MA 02169.
IMPORTANT!
Your CLARK vehicle has been built to meet all applicable
mandatory design and construction requirements of ANSI /
SAIA A92.6 - 2006 (R2014) American National Standard
for Self-Propelled Elevating Work Platforms . No addi-
tions, omissions, or modifications should be made to the
vehicle that affect compliance to the above requirements or
in any way minimize the effectiveness of the safety devices.
WARNING
In accordance to California Health & Safety Code Sec-
tions 25249.5 et. seq. This warning is to inform you that
this product can expose you to chemicals known to the
State of California to cause cancer, birth defects and
other reproductive harm.
For more information, visit: www.p65warnings.ca.gov