manualshive.com logo in svg

Clarity SN-4035-WX Bobcat, User Manual, Page: 81 / 120

Share
Download
Clarity SN-4035-WX Bobcat User Manual Download Page 81

71

The checked events in 

Auto Setup Options

 occur when 

• the input changes, say from XGA to UXGA
• a new source is selected
• you press the 

SETUP

 button. 

Retry on lost signal

, when checked, means the Bobcat 

will look for a valid picture on the other connectors 
whenever sync on the current connector is lost. Bobcat 
will stop on the next connector that has a picture 
(sync). 

Do Quick Black/White Levels

 automatically adjusts the 

lightest and darkest pixels to be white and black. This 
fully automatic method is prone to small errors in the 
white level. Semi-automatic level adjustment is better. 
See Input Levels.

(See also“Advanced Options”, page 50.)

Advanced Options: 

Menu Options, 
Auto Setup

H

 and 

V Position

 move the menu on the screen, not the picture.

Menu Timeout

 is in seconds. Menus disappear after this time 

when there is no remote control activity. Zero seconds means 
menus do not disappear. 

Menu Rotation

 rotates the menu for Portrait orientation. It does 

not

 rotate the picture.

(See also“Advanced Options”, page 50.)

MISC

 opens the 

Advanced 
Options menu 
directly. 

Summary of Contents for SN-4035-WX Bobcat

























































































































Reviews:

No comments