manualshive.com logo in svg

Clarity RetCam Shuttle, User Manual, Page: 32 / 177

Share
Download
Clarity RetCam Shuttle User Manual Download Page 32

Introduction

            

31

RetCam 3 and RetCam Shuttle User Manual

PN 18-000393 Rev. A

The Electro-Optical Box (EO Box)

The EO box is like the central nervous system of the RetCam Shuttle, receiving input from 
the footswitch and camera, and directing its output to the camera, computer and notebook 
display. It contains the illumination port and light intensity controllers, focus, camera and 
footswitch controllers, and it passes live images from the camera to the screen. This 
section describes its components and their functions.

Figure 10

Electro-Optical (EO) Box

NOTE

It is not necessary to remove any of the connectors for storage or 
transportation.

Do not remove any connections while the system is powered ON. The main 
power switch must be OFF prior to connecting or disconnecting any cables 
from the EO box.

Do not look directly into the Lamp (Fiber Optic) opening when the EO box is 
ON.

Camera Handpiece 
Connector

Fiber Optic Illumination Port

On - Off Switch

Footswitch Connector

USB 2 Connector: Footswitch to Notebook

Notebook power 
(always ON with main system power)

Handpiece Focus

USB 1 Connector: Camera to Notebook

Summary of Contents for RetCam Shuttle


















































































































































































Reviews:

No comments