7
Figure 8.
(Solar powered version shown) Mounting plate orientation: Horizontal (left) if attaching
to a pole (right). Zip ties not included.
05
ASSEMBLY
1.
Use a Philips head screwdriver to attach the back-mounting plate to the device with the
provided screws. The plate can be attached horizontally or vertically depending on the
infrastructure. See Figures 6-8 to determine the best orientation.
If securing onto a wall
If hanging onto a
wall
If attaching to a pole
2.
Screw the provided antenna into the Node and orient the antenna upright as
illustrated in Figure 9.
Figure 6.
(Solar powered version shown) Mounting plate orientation: Vertical (left) if securing onto a
wall (right). Screws for wall mounting not included.
Figure 7.
(Solar powered version shown) Mounting Scenario: Mounting plate orientation: Horizontal
(left) if hanging onto a wall (right). Screws for wall hanging not included.
