Clarity DL-24ECB Manual Download Page 1

 

947454 

 

CSP DL-24ECB 

Issue 2 

  

 
 
 
 

DL-24ECB 

EMERGENCY/NORMAL CALL SWITCH  

WITH VOLUME CONTROL

 

 
 

INTRODUCTION

 

The DL-24ECB is an Emergency/Normal Call 
Switch with Volume Control, designed to be 
used with the DL-24A and DL-24AEXP, Page 
Control Units.  The DL-24ECB is provided with 
an "Emergency" call button and a "Normal" call 
button for connection to customer provided 
signaling equipment. 
 
The "Emergency" button transposes a single 
press of the button into the four required closures 
required to generate an "Emergency" class of 
service call.  The "Normal" call button allows a 
"Normal" class of service call.  
 
 

FEATURES 

• 

Designed to fit a single-gang electrical box 

• 

No external power source required 

• 

Red "Emergency" button for emergency call 

• 

Black "Call" button for normal call 

• 

Built-in volume control 

 
 

CONNECTIONS/SETUP 

1.  Connect switch inputs from control unit to 

DL-24ECB as shown in connection diagram. 

2.  Connect Tip and Ring from control unit to 

DL-24ECB as shown in connection diagram. 

3.  Connect DL-24ECB to Tip and Ring of 45 

Ohm Talkback Speaker. 

4.  Press either call button to test loudness of 

tone at speaker and adjust volume of tone 
through cut-out on the front of the           

DL-24ECB enclosure using a 1/16" flat tip 
screwdriver. 

5.  Place DL-24ECB over standard single -gang 

electrical box and fasten in place using the 
two screws provided. 

 
 

TECHNICAL ASSISTANCE

 

When trouble is reported, verify that power is 
being supplied to the unit and there are no shorts 
or grounds on cabling. 
 
Assistance in troubleshooting is available fro m 
the factory.  When calling, you should have a 
VOM and a telephone test set available and be 
calling from the job site.  Call (540) 563-2000 
and ask for Technical Support or (540) 767-1555 
for Clarity 24-hour Faxback System or visit our 
website at http://www.clarity-com.com. 
 
Clarity equipment is not field repairable.  Clarity 
maintains service facilities in Roanoke, VA.  
Should repairs be necessary, attach a tag to the 
unit clearly stating company name, address, 
phone number, contact person and the nature  of 
the problem.  Send the unit to: 
 

Repair and Return Dept. 

Clarity 

5614 Hollins Road 

Roanoke, VA  24019-5056 

 

 

 
 
 

 

 
 

Reviews: