10
diately. The six second timer is provided for your convenience, in case
the system is accidentally triggered.
disarming without a remote
This feature allows you to disarm the security system without the
remote should it be lost, damaged, or disabled. In order to disarm the
system without a remote, you must have the vehicle’s ignition key and
know where the override switch is located. Be sure to check with the
installer for the location and the number of presses of the override
switch required to disarm the system.
To disarm the security system,
turn the ignition to the ON posi-
tion. Press the override switch the
preset number of times (one to
five times) within 15 seconds.
After five seconds the system will
disarm. If the system does not
disarm, you may have waited too
long; turn the ignition off and on
and try again.
Location of override switch
_________________________________
Number of Pulses
________________________________________
iim
mp
poorrtta
anntt!! The unit can be programmed to respond to one to
five pulses of the override switch for the disarm function. Be
sure to check with the installer for the desired programming.
DRW-35
