41
NZ502E
English
English
Owner’
s Manual
English
Owner’
s Manual
Preset Scan
The Preset Scan receives the stations stored in the
preset memory in order. This function is useful when
searching for the desired station in memory.
1. Touch the
[FM1/2/3/AM]
key to select the desired
band. (FM or AM)
2. Touch the
[
]
key to start the Preset Scan.
The unit starts scanning each station for 10 seconds
sequentially. But the station stored is not a valid
station; the scanning time is only 2 seconds.
3. When the desired station is tuned in, touch the
[
]
key again to stay in that station.
LOC/DX Setting
The DX / LOC setting changes the tuner sensitivity in
order to separate closely spaced stations. This feature
is useful in areas that have many radio stations in
close proximity.
1. Touch the [
] key to switch to LOCAL tuner
sensitivity.
2. Touch the [
] key to switch to DX tuner
sensitivity.
16. RDS OPERATIONS
This unit has a built in RDS decoder system that
supports broadcast stations transmitting RDS data.
This system can display the name of the broadcast
station being received (PS), and can automatically
switch to the broadcast station with the best reception
as you move long distances (AF switching). Also, if a
traffic announcement or program type information is
broadcast from an RDS station, no matter what mode
you are in, this broadcast is received. Additionally, if
EON information is received, this information enables
automatic renewal of other preset stations on the
same network and interruption of traffic announcement
from other stations .
This function is not available in some areas.
“AF”:
Alternative Frequency
“PS”:
Program Service Name
“PTY”:
Program Type
“TP”:
Traffic Program
• The RDS interrupt does not work during AM radio
reception.
10
12
11
4
5
9
13
14
1
2
3
7
6
8
16
15
17
18
19
20
22
21
23
1. Band Display
2. LOC/DX Display
3. Frequencies Display
4. RDS Station Display
5. Time Display
6. PS Name Display
7. Program Type Display
8. Radio text Display
9. Setting Button
10. Preset Scan Button
11. Direct Button
12. Preset List Button
13. Tune Down
14. Tune Up
15. TA Setting
16. AF Setting
17. REG Setting
18. LOC/DX Mode Setting
19. PTY Setting
20. Return Button
21. PTY Seek
22. Auto Store
23. Program Type Setting and Display
Summary of Contents for NZ502E
Page 65: ...NZ502E NP402E ...
