Clarion NX706AU Navigation Manual Download Page 67

Page: 67 / 77

NX706AU

English 67

Set the verbosity of the voice instructions, that is how much they tell and how

often they speak.

•

Minimal: the voice instruction is given once right before the next

manoeuvre.

•

Medium: the voice instruction is given when approaching the next

manoeuvre and it is repeated right before the manoeuvre.

•

Verbose: the voice instruction is given first relatively far from the next

manoeuvre, it is repeated when approaching the next turn, and it is

repeated again right before the actual manoeuvre.

Allow reading out a quick summary of the route whenever a route is calculated.

Allow reading out information about the country you have entered, when you

cross country borders.

Allow reading out real-time traffic messages.

Allow announcing system messages.

4.3.3 Warnings settings

You can enable and modify the following settings:

Button

Description

Clarion Navigation is able to warn you if you exceed the current speed limit. This

information may not be available in your region, or may not be fully correct for all

roads on the map.
This setting lets you decide whether you wish to receive visible and/or audible

warnings.
The following warning types are available:

•

Visual warning: the current speed limit is shown on the map when you

exceed it.

•

Audio and Visual warning: besides the current speed limit being shown

on the map, you also receive a verbal warning when you exceed the

speed limit with the set percentage.

If you prefer to see the speed limit sign on the map all the time (normally, it is

shown only if you exceed the limit), you can set it here.
You can also set the relative speed above which the application initiates the

warning by adjusting a slider. The value can be different within and outside

towns.

Summary of Contents for NX706AU














































































Search results

Summary of Contents for NX706AU

Reviews:

Related manuals for NX706AU

Brands by name

Popular brands

Clarion NX706AU, Navigation Manual

Search results

Summary of Contents for NX706AU

Reviews:

Related manuals for NX706AU

Brands by name

Popular brands