Clarion DXZ955MC Owner'S Manual Download Page 32

Page: 32 / 58

DXZ955MC

280-8036-00

English

Sound Adjustment

No. Function Name

Description

FLAT

Sound source flat
equalizing

BASS BOOST Bass tones enhanced

HIGH BOOST

Mid and treble
enhanced

IMPACT

Low and treble
enhanced

ACOUSTICAL

Mid tones (human
voice) enhanced

USER

User preference

Adjusting bass/treble

The bass/treble mode can be adjusted only
when the “

SPEAKER SELECT

” is set to “

WAY

”, “

2 WAY

”, or “

NORMAL

” (cf. page 14) and

“

EQ SELECT

” is set to “

BASS/TREB

” (cf. page

43).

• The factory default setting is “

”.

1. Press the [

SOUND

] button.

2. Touch [

BASS

] or [

TREBLE

BASS

RTN

3. Touch

on the right of the display and

adjust the item as desired.

∗

This item can be adjusted within the range
-6 to +6.

4. Press the [

SOUND

] button to return to the

original mode.

Adjusting balance/fader

BALANCE:

Adjusts the volume balance between the left
and right speakers.

FADER:

Adjusts the volume balance between the front
and rear speakers.

• The factory default setting for

BALANCE

“

” and for

FADER

is “

”.

1. Press the [

SOUND

] button.

2. Touch [

BALANCE

] or [

FADER

BALANCE

RTN

3. Touch

on the right of the display and

adjust the item as desired.

∗

“

BALANCE

” can be adjusted within the

range L13 (left side emphasized) and R13
(right side emphasized).

∗

“

FADER

” can be adjusted within the range

R12 (rear side emphasized) and F12 (front
side emphasized).

4. Press the [

SOUND

] button to return to the

original mode.

Selecting the VSE menu

VSE (Virtual Space Enhancer) allows you to
compensate the sound pressure balance inside
your car so that the same sound effect can be
obtained whichever seat you are sitting in as
proved in compensation simulations.

• The factory default settings are “

OFF

” for VSE

and “

FLAT

” for the VSE basic menu.

■

VSE basic menu

Six basic menus are pre-stored to this function.
Select the basic menu to suit your preference.

1. Press the [

SOUND

] button.

2. Touch [

VSE

P.EQ

FILTER

RTN

OFF

SOUND

ADF

VSE

VOLUME

BALANCE

1 2

3. Touch [

ON/OFF

The VSE effect is toggled ON/OFF.

VSE MODE

RTN

FLAT

OFF

ON/OFF

PRESET

P 1

PRESET

When VSE is set to “

OFF

”, the VSE setting

is not reflected on the music source. This
completes the VSE setting. Press the
[

SOUND

] button to return to the original

mode.

4. Touch

on the right of the display and

select one of the VSE basic menus.

VSE basic menus

5. Press the [

SOUND

] button to return to the

original mode.

+DXZ955MC_01-27-Eng.p65

05.1.17, 5:16 PM

Summary of Contents for DXZ955MC



























































Search results

Summary of Contents for DXZ955MC

Reviews:

Related manuals for DXZ955MC

Brands by name

Popular brands

Clarion DXZ955MC, Owner'S Manual

Search results

Summary of Contents for DXZ955MC

Reviews:

Related manuals for DXZ955MC

Brands by name

Popular brands