clage 3200-36450, Operating And Installation Instructions

Page: 45 / 314

45
EN
CLAGE
For installations under difficult conditions, these mounting accessories are available:
Mounting kit frame RDX 3
(Art. no. 36100)
The instant water heater can be installed by means of this mounting kit when the
power supply cable is coming out of the wall at any place from behind the unit, or the
wall has unusual surface conditions, making it difficult for installing the water heater.
When using the RDX the protection class changes from IP25 to IP24.
Mounting accessories
5. Installation
Extension kit VDX
(Art. no. 34120) – RDX / RDX 3 is necessary! –
The instant water heater can be installed by means of this extension kit if the water
pipes are coming displaced or exchanged out of the wall or if they are coming edge-
wise on the wall to the unit. The power supply could come out of the wall at any place
under the unit or the wiring could be installed surface-mounted.
Extension kit UDX
(Art. no. 34110) – RDX / RDX 3 is necessary! –
The instant water heater can be installed by means of this extension kit if the water-
connections are expiring above the unit. The power supply could come out of the wall
at any place under the unit or the wiring could be installed surface-mounted.
RDX 3
VDX
UDX