324
00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
13 Maintenance
13.8 Drive belts / drive chains
67089
87288
13.8.5 Adjusting belt (R2)
– Observe the general warnings at the beginning of
the "Maintenance" chapter.
– Adjust the spring-loaded cylinder (1):
- Ensure that spring-loaded cylinder (1) is
mounted in the rear hole (E).
- Adjust spring guide tube (2) with the front
attachment engaged until
dimension (X) is
around 20 mm
. Adjust nut (3)
at the same time and jam with the spring guide
tube. Check dimension (X).
– Adjusting the belt guide:
- Adjust belt guides at position (A, B, C and D) so
with the front attachment engaged that the fol-
lowing dimensions result between belt back
and belt guide.
Dimension (Y) = 5 - 7mm
,
dimension (Z) = 4 mm
- Tighten all the bolts.
– Carry out a test run and check belt tension.
29951
82
X
3
2
1
Y
D
A
Z
B
C
E
R2
Danger!
Parts can be thrown off by a relaxing spring.
Serious injuries.
– Precisely follow the following handling
instructions.
