00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
267
13 Maintenance
13.2 General Information
67089
83929
13.2.18 Cleaning of surfaces with decals
applied
38041
13.2.19 Winter storage instructions for
combines
Winter storage of the machine after the harvest is nec-
essary in order to protect the capital invested into the
machine. Thorough and conscientious maintenance
and cleaning and the replacement of worn or damaged
parts at this point will save time and money when the
machine is required for operation again.
– Clean the machine thoroughly inside, particularly
the threshing drum, concave, the space behind
the drum, the preparation floor, return floors, straw
walkers and above the cleaning fan.
– Open the elevator covers and auger troughs.
– Clean the exterior of all bearings thoroughly of
grease and dust.
– Preserve the machine including the grease points
to be greased at annual intervals after the harvest
by pressing in brand-name grease.
Caution!
Cleaning areas where adhesives have been
applied with a high-pressure jet cleaner.
The decals will be damaged.
– Avoid cleaning with a high-pressure jet
cleaner.
– Clean such areas with a high-pressure jet
cleaner only from a sufficient distance.
– Set the water pressure and the water
temperature as low as possible.
– Do not stress decals mechanically when
cleaning.
– Replace damaged and illegible decals
(hazard warning signs / safety decals /
lettering) immediately.
WARNING:
Cleaning of front attachment / machine with
water.
Material damage by corrosion.
– Avoid cleaning with water.
– Before and after cleaning with water
grease all grease points.
After that, let the front attach-
ment/machine run for some minutes.
– Do not clean hollow spaces and cable
leadthroughs with water.
