10
00 0290 395 0 - RHB C 490-C 370 - 03/09
1 Introduction
General repair instructions
44966
General repair instructions
2475
Specifications
Technical data, dimensions and weights are given as
an indication only. CLAAS reserves the right to make
changes subsequently as technical developments con-
tinue. Responsibility for errors or omissions not
accepted.
14015
Reason of damage
Identify reason of damage, limit the case of damage
and safeguard the machine.
67982
Spare parts
Use original CLAAS spare parts and the appropriate
special tools.
With all spare part orders and technical questions,
please provide the machine number of the forage har-
vester as well as the corresponding serial numbers for
the diesel engine and the implements. This is required
as otherwise it may result in a delivery of incorrect
spare parts.
Only use original CLAAS spare parts, accessories and
ancillary equipment that have been tested and
approved by CLAAS. This is the only way to ensure
that the design-related characteristics of the harvest-
ing machine as well as its functional efficiency are
maintained. In addition, original CLAAS parts maintain
the active and / or passive driving safety as well as
occupational safety of the machine.
CLAAS is not subject to any liability for damages inso-
far as they were caused through the use of non-
genuine CLAAS parts, CLAAS accessories and
CLAAS ancillary equipment.
14021
Gearboxes
When removing the gearboxes, always drain the gear-
box oil first and then remove the gearbox. Separate
parts which are firmly connected with each other by
means of a soft metal-tip or plastic-tip hammer.
14045
Welding Work
Note!
All information regarding this subject-matter
can be found in the current Operator's manual
of the machine.
Find manuals at http://best-manuals.com/search?&s=CLA-2903950
