Cla-Val PC-22D Electronic Pump Control Panel
Installation, Operation & Maintenance Manual
Page | 7
3.1
Specifications
Material Specification for the Electronic Pump Control Panel as follows:
Panel Enclosure
Material
Flame retardant UL rated PC/ABS plastic
Enclosure Panel Dimensions
20.0” (508 mm) H x 18.0” (457 mm) W x 9.0” (228 mm) D
The enclosure panel shall be provided with all necessary mounting
brackets.
Panel Integral Controller
Display Type
4.3” Color TFT-LCD, 480 x 272 pixels
Display Update Rate
100ms
Programming Method
Mechanical Push Button VNC
Password
5 digit
Enclosure Environmental
NEMA 4X
Controller Mass Data Storage
Type
4GB SD Card
Language
English
Temperature Range
14°F to 158°F (-10°C to 70° C)
Humidity
90% RH, non-condensing
Memory Protection
10 year life lithium battery
Power Requirement
Power
120VAC @ 60Hz protected with 5 Amp Fuse & Circuit Breaker
Motor Starter Contacts:
10 amp maximum
Valve Solenoid Contacts:
10 amp maximum
Remote Alarm:
1 amp maximum
Controller Inputs
Analog
4-20mA; (6) Inputs Available (0-5 V / 0-10 V)
Resolution
10 bit
Digital
(6) digital inputs (Dry contact)
Units
Configurable
Decimal Point
0 / 0.0 / 0.00 / 0.000
Signal Filter
Configurable 1 to 60 seconds
Totalizer
Configurable Input and Units
Totalizer Reset
Yes
I/O Connection
Screw Terminals
Controller Outputs
Pump Relay
10 Amp Max
Control Valve Relays
120VAC @ 60Hz Output (double chamber valves)
24VDC Solid State Relay Output (single chamber valves)
Alarm Relay
(2) Available and Configurable
Analog
4-20mA; (4) Outputs available
Resolution
10 bit
Solenoid
(2) Solid State Relay, Zero Switching Voltage
Relay
(2) Mechanical Relay, Rated Voltage 250VAC,
Rated Current 6A