Cla-Val PC-22D Electronic Pump Control Panel
Installation, Operation & Maintenance Manual
Page | 9
4 Installation
For Installation in USA:
The Cla-Val VC-22D must be installed in accordance with the National
Electrical Code (NEC) NFPA 70.
For Installation in Canada:
The Cla-Val VC-22D must be installed in accordance with the Canadian
Electrical Code CSA 22.1. All input circuits must be derived from a CSA approved Class 2 source.
For European Community:
The Cla-Val VC-22D must be installed in accordance with the ATEX
directive 94/9/EC.
4.1
Unpacking
Remove enclosure from box. Inspect the packaging and contents for damage. Report damages, if any, to
the carrier.
If any part is missing or the control malfunctions, please contact your supplier or the factory for
assistance.
4.2
Mounting the Enclosure
The PC-22D Electronic Pump Control Panel is NEMA 4X rated. Molded fiberglass polyester with
enhanced UV inhibitors protect against outdoor weathering. Stainless steel mounting brackets and
hardware are provided for mounting to the rear of the enclosure.
1. PC-22D Enclosure Physical Dimensions:
Figure 2. PC-22D Enclosure Footprint Dimensions.