4
4.
Wiring
Before getting started
WARNING! It must be installed by a qualified electrician in accordance with
all applicable regulations and building codes. Improper wiring can result in
personal injury or damage to control units or other equipment. Always turn
off circuit breaker or remove main fuse from power line before doing any
work. To avoid overheating and possible damage to equipment.
WARNING! Do not operate when any lamps removed or burned out; replace
any burned out lamps immediately; use only transformers that incorporate
thermal protection or fused primary windings. ! This product is designed for
residential and commercial use, for indoor use only.
WARNING! Install in accordance to all national and local electrical codes.
IMPORTANT! CityGrow® is not liable for any damage incurred with the
misuse of the product.
IMPORTANT! Pre-setup can only be done by a professional technician or
manufacturer agent.
