background image


 

Radio Compliance Information 

 
5792 SHoW DMX Neo™ Radio Transceiver 
FCC ID: 

VU65792 

IC ID:   

7480A5792 

    
FCC Part 15 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that interference will not occur in a 
particular installation. 
If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference 
by one or more of the following measures: 
• Reorient or relocate the receiving antenna. 
• Increase the separation between the equipment and receiver. 
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
• Consult the dealer or an experienced radio/ TV technician for help. 

 
Radio Frequency Notifications 
 
FCC Notifications 
RF Radiation 

The Product is an intentional radiator of Radio Frequency (RF) energy. In order to limit RF 

exposure to personnel in the immediate area, the Product should be located and installed such that a 
separation of at least 20 centimeters is maintained between the Product’s antenna and personnel in the 
vicinity of the device. 

 
Modification Warning 

Caution: changes or modifications to this equipment, not expressly approved by City Theatrical Inc. could 
void the user’s authority to operate the equipment. 

 
Industry Canada Notifications 

This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following 
two conditions: (1) this device may not cause interference, and (2) this device must accept any 
interference, including interference that may cause undesired operation of the device. 
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 
Product Installation and Configuration Guide © City Theatrical Inc. 2007 

 
5792 Approved Antenna 

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen 
that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful 
communication. 
This device has been designed to operate with the antennas listed below. Antennas not included in this 
list or having a gain greater than 5 dB are strictly prohibited for use with this device. The required antenna 
impedance is 50 ohms. 
 

 
 
 
 
 
 
 

Summary of Contents for SHoW DMX SHoW Baby












Reviews: