CT ACTIVE
POWERED SPEAKERS
Order ref: 170.254, 170.257, 170.260, 170.263, 170.266
User Manual
Page 1: ...CT ACTIVE POWERED SPEAKERS Order ref 170 254 170 257 170 260 170 263 170 266 User Manual ...
Page 2: ... voltage and condition of IEC lead before connecting to power outlet Ensure signal leads are good condition with no short connections or damaged plugs Placement Position on a stable surface or pole mount stand If suspended by flying points ensure fixings are adequate for the weight load Keep away from heat sources and away from damp or dusty environments Ensure adequate access to controls and conn...
Page 3: ...aching clip level If the red CLIP LED illuminates more than very briefly reduce the volume until it illuminates only briefly on loud peaks in the sound Before powering down turn the channel gain controls fully down to avoid loud noises when switching off CT15SA 170 266 With VOLUME control turned fully down switch on the power switch Ensure a signal is playing to the input and gradually increase th...
Page 4: ...x 321 x 321mm 620 x 415 x 391mm 700 x 485 x 460mm 700 x 485 x 460mm Weight 8 6kg 10 5kg 23kg 30 5kg 30 5kg Troubleshooting No power light on rear panel switch Ensure IEC inlet is connected to mains and mains lead is in good condition Ensure mains outlet is switched on Check mains fuse If repeatedly blowing refer to qualified service personnel Power light is on but no other LEDs and no output Check...
