3> Mode option and signal cable connection:
A
Stereo connecting mode
M
O
D
E
BRIDGE
PARALLEL
STEREO
+1
-2
-3
-4
-5
-6
0dB
-1
20
30 40 50 60 80 100
200
300 400 500
Hz
B
Mono paralleled mode:
C
Bridged mode:
11
When LF cutting is at 5Hz, the audio signal
can be amplified really.
Like the below drawing:
Like the below drawing:
Connecting direction:
Put the switch of mode at stereo,
like the below picture:
Under the stereo mode, the signal on channel A and
channel B is independent, the signal to channel A is
just for channel A, the signal to channel B is only for
Channel B.Like the below drawing:
Put the switch of mode at PARALLEL, like the
below picture:
Under the mono parallel mode, the effect of input
signal from channel A and channel B is same. The
signal on input channel A can be provided to output A,
also to output B. The signal on input channel B not only
provide to output A, also to output B, But please not
input the signal from channel A and B at the same time.
Note: The mono parallel mode just means the
parallel of input signal. Never parallel the output
terminals, Like the below drawing:
Put the switch of mode at BRIDGE,like the
below picture:
Under the bridged mono, signal just can be input from
channel A, no voice if input from channel B, the anode
of output A is the anode of bridged output, the anode
of output B is the cathode of bridged output. Suggest
connecting 8 load, like below drawing:
Prohibit connecting 2
or less than 2
load under bridged mode, avoid
burning the amplifier under overload.
The voltage is very high under the bridged mode, it is very dangerous for
people, the equipment must be turned off before bridging.
Function Setup And Cable Connecting
L
F
F
IL
T
E
R
50HZ
25HZ
5HZ
