CITROËN C3 Handbook Download Page 69

Page: 69 / 292

Access

C3Picasso_en_Chap04_ouverture_ed01-2015

After unlocking the vehicle, pull on the grip

and raise the tailgate.

Boot

when the engine is running

this warning lamp comes on,

accompanied by a message on

the multifunction screen for a few

seconds,

Tailgate release

Unlocking

Fold back the rear benchseat to gain

access to the lock from inside the boot.

Insert a small screwdriver into hole

of the

lock to unlock the tailgate.

Closing

If the tailgate is not closed correctly:

Opening

when the vehicle is moving

(speed above

6 mph (10 km/h)), this warning lamp comes

on, accompanied by an audible signal and
a message on the multifunction screen for

a few seconds.

Lower the tailgate using the interior grab

handle.

System for mechanical unlocking of the boot
in the event of a battery or central locking
malfunction.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 69 / 292

Search results

Summary of Contents for C3

Reviews: