CITROËN C3 Handbook Download Page 259

Page: 259 / 292

257

C3PICASSO_EN_CHAP13B_RD45_ED01_2015

STEERING MOUNTED CONTROLS

Radio: automatic search for a higher frequency.

CD / MP3 / USB: selection of the next track.

CD / USB: continuous press: fast forwards play.

Move in the list.

Change audio source.

Confirm a selection.

Call/end call on the telephone.
Press for more than 2 seconds:
telephone main menu.

Radio: automatic search for a lower

frequency.
CD / MP3 / USB: selection of the
previous track.
CD / USB: continuous press: fast
reverse.
Move in the list.

Radio: select the previous/next pre-set

station.
USB: select genre / artist / folder from

the classification list.

Select the previous/next item in a menu.

Volume increase.

Volume decrease.

Mute: press the volume
increase and decrease
buttons simultaneously.
The sound is restored
by pressing one of the

two volume buttons.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 259 / 292

Search results

Summary of Contents for C3

Reviews: