CITROËN C3 Handbook Download Page 237

Page: 237 / 292

235

C3Picasso_en_Chap13a_RT6-2-8_ed01-2015

Press the button on the numerical keypad to recall a
preset station.

Or press then turn the thumb wheel at the steering

mounted controls.

Presetting a station

After selecting a station, press one of the buttons
on the numerical keypad for 2 seconds to preset the
current station.

An audible signal confirms that the station has been

preset.

Press

RADIO

Activate / Deactivate RDS

RDS, if activated, allows you to continue listening to the same station

by automatic retuning to alternative frequencies. However, in certain

conditions, coverage of an RDS station may not be assured throughout
the entire country as radio stations do not cover 100 % of the territory.

This explains the loss of reception of the station during a journey.

Select "

Guidance options

" then

confirm.

Activate or deactivate "

RDS

" then

confirm.

RADIO

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 237 / 292

Search results

Summary of Contents for C3

Reviews: