CITROËN C3 Handbook Download Page 22

Page: 22 / 292

Monitoring

C3Picasso_en_Chap01_controle-de-marche_ed01-2015

Warning/indicator

lamp

is on

Cause

Action / Observations

AdBlue

additive

(BlueHDi Diesel)

fixed, on switching

on the ignition,
accompanied by an
audible signal and a
message indicating the
remaining driving range.

The remaining driving range is

between 350 miles (600 km) and

1500 miles (2400 km).

Have the AdBlue

additive tank topped up as soon

as possible: go to a CITROËN dealer or a qualified

workshop, or carry out this operation yourself.

flashing associated with
the SERVICE warning

lamp, accompanied by
an audible signal and a
message indicating the
remaining driving range.

The remaining driving range is

between 0 and 350 miles (600 km).

You must

top-up the

AdBlue

additive tank to

avoid

a breakdown

: go to a CITROËN dealer or a qualified

workshop, or carry out this operation yourself.

flashing, associated

with the SERVICE
warning lamp,

accompanied by an
audible signal and a
message indicating that
starting is prevented.

The AdBlue

tank is empty: the

starting inhibition system required
by legislation prevents starting of the
engine.

To be able to start the engine, you must

top-up the

AdBlue

additive tank: go to a CITROËN dealer or

a qualified workshop, or carry out this operation

yourself.
It is

essential

to add at least 3.8 litres of AdBlue

the additive tank.

For topping-up or for more information on the AdBlue

additive, refer to the corresponding section.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 22 / 292

Search results

Summary of Contents for C3

Reviews: