manualshive.com logo in svg

CITROËN C3, Handbook, Page: 209 / 292

Share
Download
CITROËN C3 Handbook Download Page 209

04

207

C3Picasso_en_Chap13a_RT6-2-8_ed01-2015

List of recent destinations.

"

Navigation - guidance

"

To delete the list of recent destinations, select "

Guidance 

options

" in the navigation menu then select "

Delete last 

destinations

" and confirm. Select "

Yes

" then confirm.

Deleting just one destination is not possible.

Go from the list to the menu (left/right).

"

Select destination

"

"

Journey leg and route

"

"

Guidance options

"

"

Map management

"

"

Stop / Restore guidance

"

Press 

NAV

.

or

To make full use of all of the 
functions of your navigation 
system, update the mapping 
regularly. Contact a 
CITROËN dealer or order 
your mapping update at 
http://citroen.navigation.com

A short press on the end of the 
lighting control stalk repeats 
the last navigation message.

NAVIGATION - GUIDANCE

Access to the "NAVIGATION" menu

Summary of Contents for C3





































































































































































































































































































Reviews:

No comments