CITROËN C3 Handbook Download Page 190

Page: 190 / 292

Practical information

188

C3Picasso_en_Chap11_informations-pratiques_ed01-2015

Changing a front or rear wiper blade

Removal

Raise the corresponding wiper arm.

Unclip the wiper blade and remove it.

Fitting

At the front, check the size of the wiper

blade as the shorter blade is fitted to the
passenger side of the vehicle.

Put the corresponding new wiper blade in

place and clip it.

Fold down the wiper arm carefully.

Before removing a front
wiper blade

Within one minute after switching off the

ignition, operate the wiper stalk to position
the wiper blades in the vertical position.

This position must be used in order to avoid

damaging the wiper blade and the bonnet.

After fitting a front wiper
blade

Switch on the ignition.

Operate the wiper stalk again to park the

wiper blades.

Procedure for replacing a worn wiper blade with a new one without the use of tools.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 190 / 292

Search results

Summary of Contents for C3

Reviews: