manualshive.com logo in svg

CITROËN C3, Handbook, Page: 123 / 292

Share
Download
CITROËN C3 Handbook Download Page 123

8

Safety

121

C3Picasso_en_Chap08_securite_ed01-2015

Lateral airbags

Deployment

A lateral airbag is deployed unilaterally in the 
event of a serious side impact applied to all or 
part of the side impact zone 

B

, perpendicular 

to the longitudinal centreline of the vehicle on a 
horizontal plane and directed from the outside 

towards the inside of the vehicle.
The lateral airbag inflates between the hip and 

shoulder of the front occupant of the vehicle 
and the corresponding door trim panel.

Curtain airbags

Deployment

The curtain airbag is deployed at the same 
time as the corresponding lateral airbag in the 
event of a serious side impact applied to all or 
part of the side impact zone 

B

, perpendicular 

to the longitudinal centreline of the vehicle on a 
horizontal plane and directed from the outside 

towards the inside of the vehicle.
The curtain airbag inflates between the front or 
rear occupant of the vehicle and the windows.

Impact detection zones

A.

  Front impact zone.

B.

  Side impact zone.

System which protects the driver and front 

passenger in the event of a serious side impact 
in order to limit the risk of injury to the chest, 

between the hip and the shoulder.

Each lateral airbag is fitted in the seat backrest 
frame, door side.

System which contributes towards improving 

the protection of the driver and passengers 

(with the exception of the rear centre 

passenger) in the event of a serious side 
impact in order to limit the risk of injury to the 
side of the head.
Each curtain airbag is built into the pillars and 
the upper passenger compartment area.

Summary of Contents for C3





































































































































































































































































































Reviews:

No comments