CITROËN C Zero, Handbook

Page: 87 / 136

7
85
Practical information
F
Check the coolant level and top it up if
necessary.
For more information on Checking levels,
refer to the corresponding section.
During operations in this compartment,
you must observe the safety instructions
provided on the labels.
Checking levels
Check all of these levels regularly, in line with
the manufacturer's service schedule. Top them
up if necessary, unless otherwise indicated.
Before topping up, make sure that the
fluid conforms to the manufacturer’s
recommendations.
Never work in the compartments while
the "Ready" lamp is on or your vehicle is
charging.
When working in the front and rear
compartments, be careful because some
areas of the compartments may be
extremely hot (risk of burns): wait at least
one hour after switching off the vehicle
or until the end of the charging process
before any such work.
Used products
Avoid prolonged contact of used fluids
with the skin.
Most of these fluids are harmful to health
or indeed very corrosive.
Do not discard used fluids into sewers or
onto the ground.
Take used fluids to a CITROËN dealer
or a qualified workshop and dispose
of them in containers provided for this
purpose.
Front compartment
Brake fluid level
The brake fluid level should be
between the "MIN" and "MAX"
marks. If not, check the brake pad
wear.
Heating system fluid level
The fluid level should be between the marks "L"
(MIN) and "F" (MAX).
Changing the fluid
This fluid does not need to be changed.
Screenwash fluid level
Top up the level when necessary.
If a level drops significantly, have the
corresponding system checked by a CITROËN
dealer or a qualified workshop.
Fluid specification
For optimum cleaning and to avoid freezing,
this fluid must not be topped up or replaced
with plain water.
https://www.automotive-manuals.net/