CITROËN C Zero, Handbook

Page: 71 / 136

69
6
Driving
Starting
F
Check that the drive selector is in position P.
F
Insert the key in the ignition switch.
F
Turn the key to position 4 (START).
F
Hold the key in that position
for a few seconds until the
"READY" indicator lights up and
an audible signal sounds.
F
Release the key.
The switch will automatically return to
position 3 (ON).
Switching off
F
Immobilise the vehicle.
F
Keep your foot on the brake pedal.
F
Place the drive selector in position P.
F
Apply the parking brake.
F
Turn the key to position 1 (LOCK).
F
Remove the key from the ignition switch.
Avoid attaching heavy objects to the key,
which would weigh down on its blade
in the ignition switch and could cause a
malfunction.
Parking brake
Application
F
Pull the parking brake lever fully up to
immobilise your vehicle.
Release
F
Pull the parking brake lever up gently, press
the release button then lower the lever fully.
When the vehicle is moving, if the
brake remains applied or is not fully
released, this warning lamp comes on.
When parking on a slope, direct your
wheels against the kerb, apply the parking
brake, put the drive selector in position P
and switch off the ignition.
Drive selector
Selector positions
P. Park.
This position allows you to start the
vehicle.
To exit position P, you must have your
foot on the brake.
R. Reverse.
N. Neutral.
D. Drive (forward).
Displays in the instrument panel
When you move the drive selector in the gate
to select a position, the corresponding symbol
appears in the instrument panel.
https://www.automotive-manuals.net/