5-2
T-Series Traffic Director Installation, Configuration and Administration Guide
Chapter 5 Administration
To log on to a T1000 by using an SSH client:
Step 1
On your workstation, start the SSH client.
Step 2
For initial configuration, use the default T1000 IP address 192.168.100.1. For subsequent
access, use the IP that was assigned during initial configuration (see
Configuring the Management Plane”
on page 2-29. Select either SSH1 or SSH2 as the
protocol.
Step 3
Log on as user “nsroot”. For initial configuration, use
nsroot
as the administrative
password. For subsequent access, use the password assigned during initial configuration.
For example:
login as: nsroot
Using keyboard-interactive authentication.
Password:
Last login: Tue Jun 16 10:37:28 2011 from 10.102.29.9
Done
>
Using the T1000 Graphical User Interface (GUI)
The graphical user interface includes a configuration utility and a statistical utility, called
Dashboard
, either of which you access through a workstation connected to an Ethernet port
on the T1000. If your computer does not have a supported Java plug-in installed, the utility
prompts you to download and install the plug-in the first time you log on. If automatic
installation fails, you can install the plug-in separately before you attempt to log on to the
configuration utility or Dashboard.
The system requirements for the workstation running the GUI are as follows:
•
For Windows-based workstations, a Pentium® 166 MHz or faster processor with at
least 48 MB of RAM is recommended for applets running in a browser using a Java
plug-in product. You should have 40 MB free disk space before installing the
plug-in.
•
For Linux-based workstations, a Pentium platform running Linux kernel v2.2.12 or
above, and glibc version 2.12-11 or later. A minimum of 32 MB RAM is required,
and 48 MB RAM is recommended. The workstation should support 16-bit color
mode, KDE and KWM window managers used in conjunction, with displays set to
local hosts.
•
For Solaris-based workstations, Solaris 7 or 8 (or higher), and the Java 2 Runtime
Environment, Standard Edition, version 1.6 or later.
•
Your workstation must have a supported web browser and version 1.6 or above of the
Java® applet plug-in installed to access the configuration utility and Dashboard.
The following browsers are supported.
•
Windows 7 operating system: Internet Explorer 8 (or higher) or Google Chrome 4.1
(or higher).
•
Windows XP operating systems: Internet Explorer 6 (or higher) or Google Chrome
4.1 (or higher).
Summary of Contents for ByteMobile T1010
Page 10: ...x T Series Traffic Director Installation Configuration and Administration Guide...
Page 14: ...Contents xiv T Series Traffic Director Installation Configuration and Administration Guide...
Page 172: ...Index Index 4 T Series Traffic Director Installation Configuration and Administration Guide...
