46
Appendix
Specifications
Printer
Category
Printing Method
Print Width
Printhead
Printing speed
Paper
Paper width
Recommended
paper
Roll paper
diameter
Paper length
Media sensor
Paper handling
mechanism
Specification
Direct Thermal
104 mm (4.09 in.)
832 dots
8 dots/mm
203DPI
50 million pulses (at printing rate of 12.5%, room
temp., and density setting of 0)
30km or more for 1P paper
2 sheets of copy paper (or 1) 10km or
more
400 dot lines/sec (max. 45 dots/line)
100 dot lines/sec. (max. 45 dots/line)
Conditions: room temp. 25°C / printing density
0/battery fully charged
Thermal paper sheets (cut paper), copy thermal
paper sheets (cut paper), thermal roll paper
112 mm (4.41 in.)
TF50-KS-E2D (Nippon Seishi)
TLC#25 black (Naigai Carbon Ink)
If any paper other than the recommended
designated paper is used, it may be impossible to
ensure adequate printing quality, so do not use
such paper.
Roll paper
Copy thermal roll paper is not compatible, do not
use it.
Max. diameter: 50 mm (1.97 in.)
Internal diameter (Min. diameter when rolling
begins): 8.0-8.5 mm (0.32-0.33 in.)
Min. paper length: 110 mm (4.33 in.)
Max. paper length: 250 mm (9.84 in.)
Reflection sensor (paper end and black mark)
Clam shell method (roll paper)
Rear loading (cut paper)
Total Dot Count
Dot Pitch
Resolution
Head life
Durability
Thermal paper
Copy paper
Thermal paper
Copy thermal paper
Thermal paper
Cut sheet paper
