4. Web Manager
27
4-4-1. CONFIG>>General Tab
LAN board Information
・
LAN board name (factory default: Net Printer)
Set the ID of the Interface board.
TCP/IP
・
Obtain an IP Address Automatically (factory default)
Automatically obtain the IP address from the DHCP server.
・
Use the following IP Address
Enter IP addresses in the IP Address, Subnet Mask, and Default Gateway fields.
UPnP Setting
・
UPnP (factory default: Enable)
Set the UPnP setting.
Print Settings
Configure the printing functions of the printer.
・
Raw Port Number (factory default: 9100)
Set the TCP port number for RAW protocol printing.
・
Timeout for print data
Set the timeout duration for the connection to the host.
・
Action at Timeout
Select the action for other connections when a timeout occurs with the host. There are two
selections: Close all connections and Move to next connection.