Citizen E76 Series Setting Instructions Manual Download Page 3

3. SPECIFICATIONS 

 

In the case the crown is of the screw-lock type, operate the crown after 
first loosening the screw and then make sure to securely retighten the 
screw after the crown has been operated. 

 

Movement Caliber 

 

E760 

 

Accuracy 

 

/- 15 seconds per month on average. (When 

worn at normal temperatures of 5

o

 C to 35

 o

 C / 41

 o

 F 

to 95

 o

 F 

 

Operating Temperature 

 

-10

o

 C to 60

 o

 C / 14

 o

 F to 140

 o

 F 

 

Display function 

Time 

 

Calendar 

 

 

 
Hours, minutes seconds (the second hand moves every 
second while the hour and minute hand move every 15 
seconds.) 
 
Date Display (With rapid correction function) 
Month and years elapsed since the most recent leap 
year are displayed by the second hand (only 
displayed when correcting the date)  

 

 

 

Additional Features 

 

• 

Power Save 1 Feature 

• 

Power Save 2 Feature 

• 

Time difference correction function (forward 
and backward in 1 hour units 

• 

Insufficient recharge warning 

• 

Time setting warning function 

• 

Overcharging prevention feature 

 

 

Eco Drive Rechargeable 

Battery 

 
 Eco Drive Manganese Titanium Rechargeable Battery.  
 (Not user replaceable.) 

 

 

Continuous operating 

time 

 

From a full charge to stop: 

Approximately 5 years (while in operation of power 
save 2 feature) 

 

2 Second interval low charge warning to stop: 

Approximately 2 Days 

 

• 

Note:  specifications subject to change without notice. 

 

 

Return to Table of Contents

 

Return to Table of Contents

 

Summary of Contents for E76 Series














Reviews: