Citizen E76 Series Setting Instructions Manual Download Page 10

6. GENERAL REFERENCE FOR CHARGING TIMES  

The time required for recharging varies according to the model of the watch 
(color of the dial, etc.). The following times are shown below to serve only as a 
reference. Recharging time refers to the amount of time the watch is continuously 
exposed to light.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 

Running Time 

At Full Charge 

Low Charge 

Warning 

 

Quick  

Start Feature 

5 Years 

2 Days 

No 

 

Charge Rates from Indoor Light Source 

Indoors, Office 

(500 lux) 

 

Fluorescent at 6" Distance 

Incandescent at 20" Distance 

(3000 lux) 

One Day 

Use 

One Second 

Step 

Full 

Charge 

 One 

Day 

Use 

One Second 

Step 

Full 

Charge 

2 Hours 

27 Hours 

22Days 

 

19 Minutes 

10 Hours 

82 hours 

 

Charge Rates from Outdoor Light Source 

Outdoors Cloudy 

(10,000 lux) 

 

Outdoors Bright Sun 

(100,000 lux) 

One Day 

Use 

One Second 

Step 

Full 

Charge 

 One 

Day 

Use 

One Second 

Step 

Full 

Charge 

6 Minutes 

2 hours 

26 Hours 

 

1.5 Minutes 

1 Hour 

7 Hours 

 
7.NOTES REGARDING USE OF THIS WATCH  

 
<Try to keep the watch charged at all times. >  
Please note that if you frequently wear long sleeves, the watch can easily become 
insufficiently charged as a result of it being concealed and unable to be exposed 
to light.  
When you take the watch off, try to place it in as bright a location as possible 
to ensure that it always keeps the correct time.  

CAUTION - Charging Precautions -  

Avoid recharging at high temperatures (over about 60'C/140'F) since this may 
result in dam- age to the watch during recharging.  
Examples:  

• 

Charging the watch in close proximity to an incandescent lamp, halogen lamp 
or other light source that can easily reach high temperatures.  

• 

Charging the watch in a location that reaches high temperatures such as on 
a car dashboard.  

• 

When charging the watch with an incandescent lamp, always make sure the 
watch is at least 50 cm (20 in.) away from the lamp so that it does not 
reach excessively high temperatures during charging.  

 
8. REPLACING THE ECO DRIVE RECHARGEABLE BATTERY  

The rechargeable battery used in this watch does not have to be periodically 
replaced in the manner of ordinary batteries as it can be charged and 
discharged repeatedly. Note: This rechargeable battery is not a user 
replaceable item
 

Return to Table of Contents

 

Return to Table of Contents

 

Summary of Contents for E76 Series














Reviews: