Citizen CT-S801, User Manual

Page: 27 / 234

— 23 —
Set the partition to the width of the paper roll you are loading.
The partition is set at the factory to the position shown below.
z
For 3-inch type: 80-mm wide paper roll
z
For 2-inch type: 58-mm wide paper roll
1. Turn off the power.
2. Press the cover open lever.
3. Open the paper cover.
4. Set the partition in a slot that matches the size of the paper roll you are using.
However, to use an 83-mm wide paper roll, remove the partition.
5. Refer to “5.3 Manual Setting of Memory Switches” to change the paper width
settings.
3.6 Partition for Paper Roll
CAUTION
Make sure the partition is not slanted when setting it for 58-mm or 60-mm paper rolls.
Partition
*1
*2 *1
Notes:
*1: 2-inch type (58/60 mm)
*2: 3-inch type (80/83 mm)